48 in (122 cm) TITAN® MX4880 (74871) - Manufacturer: Toro
The TITAN® MX4880 gives you MORE of everything-performance, durability and control. This 48" deck mower features a bull-nose bumper, a 21.5 hp Kawasaki® 726cc Engine, and a heavy-duty frame. Built to last, AND designed for user comfort, the MX4880 features a thickly padded Toro Premium Seat and padded armrests, dual oversized Comfort Grip™ levers with hydraulic dampers, and full 3-D isolation. In addition, Toro’s cutting technology always gives your lawn a superior quality of cut.
|Engine||21.5 hp* Kawasaki® 726cc|
|Fuel Capacity||5 gal (18.9 L)|
|Mowing Speed||7.5 mph|
|Cutting Width||48 in|
|Blade Tip Speed||18,000 ft/min**|
|Deck Design||10-gauge fabricated w/ bull-nose bumper|
|Discharge Chute||Molded Rubber|
|Engine Horsepower||21.5 hp*|
|Engine Construction||Forced Air-Cooled V-twin 4-cycle Vertical Shaft OHV|
|Engine Displacement ||726cc|
|Foot Operated height of Cut||Standard|
|Ground Speed||7.5 mph|
|Height||74 in ROPS Up/47 in ROPS down|
|Height of Cut||1.5 in to 4.5 in 13 position|
|Mulching||Optional (Recycler Mulch Kit)|
|Number of Blades||3|
|Seat||Thickly-padded Toro Premium Seat|
|Spindle Housing||7.75 in diameter / 1 in (2.54 cm) Shaft|
|Steering Controls||Dual oversized Comfort Grip™ levers with hydraulic dampers|
|Tires||Front 12 in x 6 in Smooth / Rear 22 in x 10 in|
|Transmission||HG-ZT3100 w/ charge pumps, shock valves & heavy duty gears|
|Washout Port||2 Standard|
|Warranty||3-year / 400 hr Limited***|
|Width||52.4 in deflector up/61.5 in deflector down|
|Disclaimer||*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission and operating requirements, the actual engine horsepower on this class of mower will be significantly lower. **Blade tip speed is the theoretical maximum speed in feet per minute and is likely to vary. ***See dealer for warranty details.|
- Fully Tubular Frame
A 1.5 in X 3.0 in (3.8 cm x 7.6 cm) fully tubular frame forms the rock solid foundation for the rest of the mower. The large continous frame tubes have seamless sides with no welded joints which provides maximum strength.
- 3 yr / 240 hr, Lifetime Frame Limited Warranty
The new TITAN Z is warranted against defects in materials and workmanship for three years or 240 hours.
- Premium Toro Seat
The premium seating system on the TITAN is truly a leader in comfort. The extra thick seat foam is contoured to envelope the operator in comfort and help hold you in place when traversing rough terrain. The seat is further cushioned by a unique adjustable seat spring suspension allowing you to have anywhere from 2 to 5 springs underneath the seat to give you customized support. A four-inch (10.2 cm) seat slide is adjustable while seated to help give you just the right fit. Adjustable armrests come standard.
- 12 in x 6 in (30.5 cm x 15.2 cm) Smooth Front Tires
Professional landscape contractors know that smooth tires reduce turf wear and improve maneuverability.
- 20 in X 10 in (50.8 cm x 25.4 cm) Rear Tires
These large, wide tires provide a smoother ride over rough terrain than smaller diameter tires. The width helps reduce turf compaction. The special tread provides the right mix of traction and reduced turf tear.
- Removable Floor Pan
Removal of the floor pan allows you easy access to the top of the deck for cleaning off grass clippings. The floor pan is also pierced to give it a textured grip and natural drain holes.
- Engine Guard
This guard protects the engine on the sides and rear from objects that might damage your engine.
- Heavy Duty Spindles
The deck used on this model is equipped with huge heavy duty 7.75 in (19.7 cm) diameter aluminum spindle housings that contain 1 in (2.5 cm) diameter spindle shafts and oversized sealed bearings.
- Hydro-Gear ZT3100
The ZT3100 hydrostatic transmission has an internal, maintenance-free brake; a guarded, spin-on filter; and is significantly easier to maintain versus a wheel pump and motor system. Plus, the ZT3100 has fewer leak points by design so homeowners can be confident their machine’s drive system is virtually bullet proof.
- 48 in (121.9 cm) Fabricated Deck
For an aggressive deck built to handle tough cutting conditions yet provide a truly superior quality of cut, Toro’s 4.5 in (11.4 cm) deep, fully welded, fabricated deck is up to the challenge. The leading edge of the deck is reinforced with a Toro "Bull-Nose" commercial style bumper. Three anti-scalp wheels in front and two anti-scalp skids in the back help the deck float over rough terrain. Create your own natural fertilizer by adding a Recycling Kit or make yard clean-up a snap with an optional Twin Bagging system.
- Folding ROPS
Folding Roll Over Protection System (ROPS) comes standard. The folding design folds easily with the help of quick-release pins. It tucks under the frame for compact storage or when mowing under low obstacles on flat ground.
- Foot Operated HOC
This system allows you to quickly raise and lower the deck while mowing without taking your hands off of the controls. The HOC has a range from 1.5 in - 4.5 in (3.8 cm - 11.4 cm) with 13 positions in quarter inch increments making sure there is a setting just right for you and your lawn.
- Rubber Discharge Deflector
A flexible rubber discharge deflector is found on most commercial zero turn mowers and allows you to mow tightly around objects without damaging the deflector.
No reviews have been added yet, be the 1st to add a review!