Toro 60 in (152 cm) TITAN® ZX6020 (74843) at Bilo Sales & Service Center

Products

Current Location: Toro bread crumb arrow

Search:

60 in (152 cm) TITAN® ZX6020 (74843) - Manufacturer: Toro

This 60" deck mower features a bull-nose bumper, a 24 hp Kawasaki® 726cc Engine, and a heavy-duty frame. Built to last, AND designed for user comfort, the ZX6020 features a contoured 18" extra tall seat with armrests. In addition, Toro’s cutting technology always gives your lawn a superior quality of cut.

Call for price

Average Rating:

Specifications
Features
Product Reviews


Engine	24 hp* Kawasaki® 726cc
Fuel Capacity	5 gal (18.9 L)
Mowing Speed	7.5 mph
Cutting Width	60 in
Anti-Scalp Wheels	3
Armrests	Adjustable Standard
Blade Tip Speed	18,000 ft/min**
Cup Holder	Standard
Deck Design	10-gauge fabricated w/ bull-nose bumper
Discharge Chute	Molded Rubber
Engine Horsepower	24 hp*
Engine Construction	Forced Air-Cooled V-twin 4-cycle Vertical Shaft OHV
Engine Displacement	726cc
Foot Operated height of Cut	Standard
Ground Speed	7.5 mph
Height	73 in/46 in (ROPS up/ROPS down)
Height of Cut	1.5 in to 4.5 in 13 position
Hour Meter	Standard
Hydrolic Dampeners	Standard
Length	77.3 in
Mulching	Optional (Recycler Mulch Kit)
Number of Blades	3
ROPS	Standard, Folding
Seat	Contoured 18 in (45.7 cm) Extra Tall w/Slide; Adjustable Seat Spring Suspension
Spindle Housing	7.75 in diameter / 1 in (2.54 cm) Shaft
Steering Controls	Dual Comfort Grip™ Levers with Hydraulic Dampers
Tires	Front 11 in x 4 in Smooth / Rear 20 in x 10 in
Transmission	Hydro-Gear® ZT2800® w/ charge pumps
Washout Port	2 Standard
Warranty	3-year / 240 hr Limited***
Width	63 in deflector up/75 in deflector down
Disclaimer	The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission and operating requirements, the actual engine horsepower on this class of mower will be significantly lower. Blade tip speed is the theoretical maximum speed in feet per minute and is likely to vary. **See dealer for warranty details.
Engine	24 hp* Kawasaki® 726cc
Fuel Capacity	5 gal (18.9 L)
Mowing Speed	7.5 mph
Cutting Width	60 in
Anti-Scalp Wheels	3
Armrests	Adjustable Standard
Blade Tip Speed	18,000 ft/min**
Cup Holder	Standard
Deck Design	10-gauge fabricated w/ bull-nose bumper
Discharge Chute	Molded Rubber
Engine Horsepower	24 hp*
Engine Construction	Forced Air-Cooled V-twin 4-cycle Vertical Shaft OHV
Engine Displacement	726cc
Foot Operated height of Cut	Standard
Ground Speed	7.5 mph
Height	74 in ROPS Up/47 in ROPS down
Height of Cut	1.5 in to 4.5 in 13 position
Hour Meter	Standard
Hydrolic Dampeners	Standard
Length	77.3 in
Mulching	Optional (Recycler Mulch Kit)
Number of Blades	3
ROPS	Standard, Folding
Seat	Thickly-padded Toro Premium Seat
Spindle Housing	7.75 in diameter / 1 in (2.54 cm) Shaft
Steering Controls	Dual oversized Comfort Grip™ levers with hydraulic dampers
Tires	Front 12 in x 6 in Smooth / Rear 22 in x 10 in
Transmission	HG-ZT3100 w/ charge pumps, shock valves & heavy duty gears
Washout Port	2 Standard
Warranty	3-year / 400 hr Limited**
Width	75 in deflector up/63 in deflector down
Disclaimer	The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission and operating requirements, the actual engine horsepower on this class of mower will be significantly lower. Blade tip speed is the theoretical maximum speed in feet per minute and is likely to vary. **See dealer for warranty details.

Fully Tubular Frame
A 1.5 in X 3.0 in (3.8 cm x 7.6 cm) fully tubular frame forms the rock solid foundation for the rest of the mower. The large continous frame tubes have seamless sides with no welded joints which provides maximum strength.
Heavy Duty Spindles
The deck used on this model is equipped with huge heavy duty 7.75 in (19.7 cm) diameter aluminum spindle housings that contain 1 in (2.5 cm) diameter spindle shafts and oversized sealed bearings.
Premium Toro Seat
The premium seating system on the TITAN is truly a leader in comfort. The extra thick seat foam is contoured to envelope the operator in comfort and help hold you in place when traversing rough terrain. The seat is further cushioned by a unique adjustable seat spring suspension allowing you to have anywhere from 2 to 5 springs underneath the seat to give you customized support. A four-inch (10.2 cm) seat slide is adjustable while seated to help give you just the right fit. Adjustable armrests come standard.
22 in x 10 in (56 cm x 25.4 cm) Rear Tires
These large, wide tires provide a smoother ride over rough terrain than smaller diameter tires. The width helps reduce turf compaction. The special tread provides the right mix of traction and reduced turf tear.
Removable Floor Pan
Removal of the floor pan allows you easy access to the top of the deck for cleaning off grass clippings. The floor pan is also pierced to give it a textured grip and natural drain holes.
12 in x 6 in (30.5 cm x 15.2 cm) Smooth Front Tires
Professional landscape contractors know that smooth tires reduce turf wear and improve maneuverability.
Engine Guard
This guard protects the engine on the sides and rear from objects that might damage your engine.
Hydro Gear ZT2800 Hydrostatic Drive System
The new ZT2800 hydrostatic transmission has a higher load capacity than the previous design; an internal, maintenance-free brake; a guarded, spin-on filter and significantly easier to maintain versus a wheel pump and motor system. Plus, the ZT2800 also has fewer leak points by design so homeowners can be confident their machines drive system is virtually bullet proof.
60 in (152.4 cm) Fabricated Deck
For an aggressive deck built to handle tough cutting conditions yet provide a truly superior quality of cut, Toro’s 4.5 in (11.4 cm) deep fully welded fabricated deck is up to the challenge. The leading edge of the deck is reinforced with a "Bull-Nose" commercial style bumper. Three anti-scalp wheels in front and two anti-scalp skids in the back help the deck float over rough terrain. Create your own natural fertilizer by adding a Recycling® Kit or make yard clean-up a snap with an optional Twin Bagging system.
Folding ROPS
Folding Roll Over Protection System (ROPS) comes standard. The folding design folds easily with the help of quick-release pins. It tucks under the frame for compact storage or when mowing under low obstacles on flat ground.
Foot Operated HOC
This system allows you to quickly raise and lower the deck while mowing without taking your hands off of the controls. The HOC has a range from 1.5 in - 4.5 in (3.8 cm - 11.4 cm) with 13 positions in quarter inch increments making sure there is a setting just right for you and your lawn.
Rubber Discharge Deflector
A flexible rubber discharge deflector is found on most commercial zero turn mowers and allows you to mow tightly around objects without damaging the deflector.
3 yr / 240 hr, Lifetime Frame Limited Warranty
The new TITAN Z is warranted against defects in materials and workmanship for three years or 240 hours.
Fully Tubular Frame
A 1.5 in X 3.0 in (3.8 cm x 7.6 cm) fully tubular frame forms the rock solid foundation for the rest of the mower. The large continous frame tubes have seamless sides with no welded joints which provides maximum strength.
Heavy Duty Spindles
The deck used on this model is equipped with huge heavy duty 7.75 in (19.7 cm) diameter aluminum spindle housings that contain 1 in (2.5 cm) diameter spindle shafts and oversized sealed bearings.
Premium Toro Seat
The premium seating system on the TITAN is truly a leader in comfort. The extra thick seat foam is contoured to envelope the operator in comfort and help hold you in place when traversing rough terrain. The seat is further cushioned by a unique adjustable seat spring suspension allowing you to have anywhere from 2 to 5 springs underneath the seat to give you customized support. A four-inch (10.2 cm) seat slide is adjustable while seated to help give you just the right fit. Adjustable armrests come standard.
22 in x 10 in (56 cm x 25.4 cm) Rear Tires
These large, wide tires provide a smoother ride over rough terrain than smaller diameter tires. The width helps reduce turf compaction. The special tread provides the right mix of traction and reduced turf tear.
Removable Floor Pan
Removal of the floor pan allows you easy access to the top of the deck for cleaning off grass clippings. The floor pan is also pierced to give it a textured grip and natural drain holes.
12 in x 6 in (30.5 cm x 15.2 cm) Smooth Front Tires
Professional landscape contractors know that smooth tires reduce turf wear and improve maneuverability.
Engine Guard
This guard protects the engine on the sides and rear from objects that might damage your engine.
Hydro-Gear ZT3100
The ZT3100 hydrostatic transmission has an internal, maintenance-free brake; a guarded, spin-on filter; and is significantly easier to maintain versus a wheel pump and motor system. Plus, the ZT3100 has fewer leak points by design so homeowners can be confident their machine’s drive system is virtually bullet proof.
54 in (137.2 cm) Fabricated Deck
For an aggressive deck built to handle tough cutting conditions yet provide a truly superior quality of cut, Toro’s 4.5 in (11.4 cm) deep, fully welded, fabricated deck is up to the challenge. The leading edge of the deck is reinforced with a Toro "Bull-Nose" commercial style bumper. Three anti-scalp wheels in front and two anti-scalp skids in the back help the deck float over rough terrain. Create your own natural fertilizer by adding a Recycling Kit or make yard clean-up a snap with an optional Twin Bagging system.
Folding ROPS
Folding Roll Over Protection System (ROPS) comes standard. The folding design folds easily with the help of quick-release pins. It tucks under the frame for compact storage or when mowing under low obstacles on flat ground.
Foot Operated HOC
This system allows you to quickly raise and lower the deck while mowing without taking your hands off of the controls. The HOC has a range from 1.5 in - 4.5 in (3.8 cm - 11.4 cm) with 13 positions in quarter inch increments making sure there is a setting just right for you and your lawn.
Rubber Discharge Deflector
A flexible rubber discharge deflector is found on most commercial zero turn mowers and allows you to mow tightly around objects without damaging the deflector.

Add Review

No reviews have been added yet, be the 1st to add a review!

Return To Category

Your name: User name to be displayed with this review.
Rating: Rating for this product.
Comments: Comments for this product.

Update Cancel